top of page

SICOMIN HOT PROCESS EPOXY

Starting from standard epoxy systems curing in a few minutes at high temperature, Sicomin has developed solutions for very large parts that need very long working time to lay up the part but fast curing for quick mould rotations.

This latest generation of very long working time and very fast curing systems have been developed with an added feature - visual curing control - the colour of the laminate changes with the progression of the fast cure cycle. This allows shop floor operators or quality inspectors to quickly and easily identify a a process fault such as an oven failure.

Sicomin hot process press
Greenpoxy epoxy

SR 8500 / SZ 8525

  • Fast and clear epoxy system for hot processes formulated for leisure and sport productions.​

  • Ideal for large scale production.

  • Low viscosity

  • Short cycle times hot process:  10 minutes at 100 °C or 20’ at 90 °C.

  • Clear system after cure

  • TG of 114°C

  • Mix ratio: 100/25 by weight

GreenPoxy 33 / SZ 8525

  • Clear epoxy system for compression moulding 

  • High bio-based carbon content.​

  • Clear laminate and final aspect.

  • High mechanical properties.

  • Good wetting out properties resulting in a low resin consumption.

  • Recommended cycle of 10 min at 100 °C

  • Mix bio-based carbon content of about 28 %.

  • TG of 120°C

  • Mix ratio: 100/24 by weight

bottom of page