top of page

SICOMIN FOAMING EPOXY

Sicomin has developed a renowned range of multiple density foaming systems that, when combined with one of Sicomins large choice of hardeners, creates versatile core material and a high strength bond between two laminate skins made of epoxy, polyester or vinylester resins.

These systems have a very low expansion pressure and are applicable in various fields such as hollow body reinforcements, energy absorption, shock, vibration, dielectric and thermal insulation.

SICOMIN-BLEU_edited.png

PB 170/ PB 250/ PB 400/ PB 600

FOAMING EPOXY

​​

  • Closed cell foam production epoxy systems from 170 to 600 kg / m³.

  • The PB 170 / DM 0x, PB 250 / DM 0x, PB 400 / DM 0x & PB 600 / DM 0x systems are two part epoxy formulations which produce closed cell low density foams

  • The densities obtained are respectively about 170, 250, 400 and 600 kg / m³ (open mould expansion)

  • The resulting foam is white but can be coloured with epoxy compatible pigments

  • The hardener modifies the curing time and reachable thickness

  • The mix evolves in two steps: rapid expansion and a slow hardening of the foam

Performance Characteristics

Results in a low density foam

  • No need for fillers such as microballoons

  • Adheres to a wide selection of materials

  • Can be poured onto and co-cured with prepregs or other epoxy laminates

  • Uniform density

  • Excellent resistance to water

  • CFC Free

Applications

  • Production of epoxy foam

  • Core material which can be produced “in-situ”

  • Buoyant and adds density to honeycombs in local areas

  • Thermal insulation

  • Suitable for making foam blocks to be machined, sculpted or modelled

TECHNICAL DATA
MSDS

PB 270i/ PB 370i/ PB 570i

FIRE RETARDANT FOAMING EPOXY

​

  • Self-extinguishing, Two part epoxy formulation which produces fireproof closed cell low density foams

  • The densities obtained are respectively about 270, 370 and 570 (open mould expansion)

  • The resulting foam is white but can be coloured with epoxy compatible pigments

  • The hardener modifies the curing time and reachable thickness

  • The mix evolves in two steps:  rapid expansion and slow hardening of the foam

  Performance Characteristics

  • Results in a low density foam

  • No need for fillers such as microballoons

  • Adheres to a variety of materials

  • Can be poured onto and co-cured with prepregs or other epoxy laminates

  • Uniform density

  • Excellent resistance to water

  • CFC Free

  Applications

  • Production of epoxy foam

  • Core material which can be produced “in-situ”

  • Buoyant and adds density to honeycombs in local areas

  • Thermal insulation

  • Suitable for making foam blocks to be machined, sculpted or modelled

  Fire Accreditations

  • PB 270 i / DM 03  meets the requirements of the CS 25/FAR 25 § 25-853 (a) App. F Part.I (a1) (ii) for flammability 12 seconds

  • CEAT-Toulouse - France PV # MT-0 8 / 8150155 /P2/A dated 12.12.2008

TECHNICAL DATA
MSDS
bottom of page