Epoxy Resin Filler
We offer a wide range of epoxy resin filler powders for a variety of end uses - fine epoxy fillers for fairing, hollow spheres to increase the volume and reduce the density of a resin system, microfibres for adding strength, and flow modifiers to thicken mixes.
- add volume
- reduce density
- for making (low strain) adhesives, and filling & fairing mixes
Microballoons. Phenolic resin spheres, brown in colour. Easy to apply, easy to sand.
Glass bubbles (Glasscell 25). White glass microballoons, better abrasion resistance than phenolic microballoons. Good density/compression resistance.
Glass bubbles (Glasscell 10). Ultralight version of Glasscell 25.
Short fibres (microfibres)
- a resin filler to add strength
- for making structural adhesives
Wood-cellulose fibres (Treecell) - for making structural adhesives, or high-density radius or fillet joints, white in colour.
- very fine powder to thicken resin
- thickens mixes and reduces their flow on vertical surfaces (increase thixotropy)
- increases initial adherance (tack)
- can be used with other fillers
Fumed Colloidal Silica (Sillicell). White in colour.
Formulations of the above
Mixfill 10 - mix of microballons & colloidal silica. Very fine particles for easy sanding.
Mixfill 27/30 - mix of microballoons & colloidal silica. Medium particle sized sanding filler.
Woodfill 130 - mix of cellulose fibres and colloidal silica. White filler, for low density radius or fillet joints, gap or hole filling.
Woodfill 250 - mix of cellulose fibres and colloidal silica. Cream colour, blends into wood with resin, for high density radius or fillet joints or bonds.
Filler + Epoxy
Mixfill 100 - solvent-free epoxy filler. Easy to apply with spatula, very easy to sand.